MAX1483CSA

27 Stck in Stange /50,- €

202411-003-117

_______________General Description
The MAX1482 and MAX1483 are low-power transceivers
for RS-485 and RS-422 communication. Both
feature slew-rate-limited drivers that minimize EMI and
reduce reflections caused by improperly terminated
cables. Data rates are guaranteed up to 250kbps.
The MAX1482/MAX1483 draw only 20μA of supply current.
Additionally, they have a low-current shutdown
mode that consumes only 0.1μA. Both parts operate
from a single +5V supply.
Drivers are short-circuit current limited and are protected
against excessive power dissipation by thermal
shutdown circuitry that places the driver outputs into a
high-impedance state. The receiver input has a fail-safe
feature that guarantees a logic-high output if the input
is open circuit.
The MAX1482 is full duplex and the MAX1483 is half
duplex. Both parts have a 1⁄8-unit-load input impedance
that guarantees up to 256 transceivers on the bus.

________________________Applications
Low-Power RS-485/RS-422 Networks
Transceivers for EMI-Sensitive Applications
Industrial-Control Local Area Networks
Large 256-Node LANs

____________________________Features
♦ Low 20μA Operating Current
♦ Slew-Rate Limited for Reduced EMI and
Reduced Reflections
♦ 0.1μA Low-Current Shutdown Mode
♦ Designed for RS-485 and RS-422 Applications
♦ Operate from a Single +5V Supply
♦ -7V to +12V Common-Mode Input Voltage Range
♦ Allows up to 256 Transceivers on the Bus—
Guaranteed (1⁄8-unit load)
♦ Current Limiting and Thermal Shutdown for
Driver Overload Protection